Advertisement
Home News Thunder Bay News - Local News & Headlines | NetNewsLedger Getting Glasses Online? Here Is What PD and Frame Width Actually Mean

Getting Glasses Online? Here Is What PD and Frame Width Actually Mean

The online eyewear market has made buying prescription glasses considerably more accessible than it was a decade ago. Lower prices, wider selection

The online eyewear market has made buying prescription glasses considerably more accessible than it was a decade ago. Lower prices, wider selection, faster delivery. For most standard prescriptions, the process is straightforward enough that millions of people now buy glasses online without ever setting foot in a practice.

But there is a gap between placing the order and the glasses actually fitting correctly, and that gap is almost always explained by two measurements that most buyers either do not have or do not know how to use. Pupillary distance and frame width. Neither is complicated once it is explained properly. Both matter more than most people realise before the first online order goes wrong.

Pupillary Distance: The Measurement Your Prescription Might Not Include

Pupillary distance, written on most prescriptions and ordering forms as PD, is the measurement in millimetres between the centres of the two pupils. It exists because the optical centre of each lens in a pair of prescription glasses needs to align directly with the corresponding pupil for the prescription to function correctly.

A lens is ground with its point of maximum optical accuracy at a specific position. When that position sits in front of the pupil, vision through the lens is as the prescription intended. When it does not, the eye is looking through a part of the lens that introduces a small but measurable deflection in the light path. The visual system compensates for this automatically, through sustained muscular effort that most people experience as eye strain, fatigue, or low-grade headaches that show up during extended wear without an obvious cause.

For mild prescriptions, a PD error of a couple of millimetres is unlikely to cause significant problems. For stronger prescriptions, particularly those with cylinder correction for astigmatism, accurate PD becomes genuinely important. For varifocal lenses, where the intermediate and near zones are positioned relative to the pupil centre, the tolerance for error is tighter still.

Single PD and Dual PD

PD comes in two formats and the distinction matters for ordering purposes.

A single PD is one number representing the total distance between both pupils, typically falling somewhere between 58 and 72 millimetres for most adults. This is what most standard prescriptions provide when they include PD at all.

A dual PD gives two separate numbers, one for each eye measured individually from the nose bridge to the pupil centre. It is written as two figures separated by a slash, such as 33/31, with the right eye measurement first. Most people’s pupils are not perfectly symmetrical relative to the nose bridge, and a dual PD captures that asymmetry in a way that a single PD cannot.

For most single vision prescriptions, a single PD is adequate. For stronger prescriptions and varifocal lenses, a dual PD produces a more accurately centred result and is worth obtaining if the choice is available.

How to Get Your PD

The simplest route is to ask the optician at your next eye examination. PD is measured as a standard part of the dispensing process and can be recorded and provided on request. It is not always printed on the prescription document automatically, which is why many people ordering glasses online for the first time discover they do not have it.

If a recent eye test has already been done and no PD was recorded, some online retailers offer a smartphone measurement tool that estimates PD from a photograph taken at a standard distance. These tools work adequately for most standard single vision prescriptions. For anyone with a strong prescription or ordering varifocals, a professionally measured value from an optician is the more reliable option.

Manual measurement with a millimetre ruler held against the nose bridge is possible, though the accuracy is limited by the difficulty of measuring your own pupil positions without assistance.

Frame Width: Why the Numbers on the Temple Arm Are Not Decoration

Every pair of glasses frames carries a three-number measurement sequence printed on the inside of the temple arm. It looks something like 52-18-145. These three numbers are the lens width, the bridge width, and the temple length, each measured in millimetres. Together they define the geometry of the frame and determine whether it will fit a specific face correctly.

The total frame width is the number most relevant to fit assessment. It is calculated as the lens width multiplied by two, plus the bridge width. For a frame marked 52-18-145, the total frame width is 52 plus 52 plus 18, which gives 122 millimetres.

Measuring your own face width at the widest point, typically at the temples, with a flexible tape measure or a piece of string gives the number to compare against. A frame within approximately five millimetres of the face width in either direction will generally fit well. A frame significantly narrower than the face will press against the temples and become uncomfortable across extended wear. A frame significantly wider will slide down the nose and require constant repositioning.

This is a measurement most people have never taken, which explains why frame fit is the most common complaint in online glasses orders where the prescription is correct but something still feels wrong.

Bridge Width and the Nose

The middle number in the temple arm sequence, the bridge width, determines how the frame sits on the nose. A bridge too narrow for the nose will push the frame high and may create pressure marks above the nose pad. A bridge too wide will allow the frame to sink and slide regardless of how well the overall width suits the face.

If you have a pair of glasses that currently fits well, checking the bridge width on the temple arm and using it as a reference when ordering a new pair is one of the more reliable ways to avoid this specific problem. Online retailers list all three measurements in their product specifications, and cross-referencing against a known good fit takes seconds.

The Practical Summary

Before any online prescription glasses order, the preparation worth doing is consistent. Obtain the PD from the prescribing optician, or use a measurement tool for a standard single vision prescription. Measure face width at the temples. Check the bridge width of a currently well-fitting pair. Then use all three when evaluating frames in an online listing before committing to a purchase.

None of this is technically demanding. It is the difference between an online glasses purchase that arrives and fits correctly and one that arrives, sits incorrectly, and requires the return and reorder process that most buyers are trying to avoid.

The measurements exist. Using them is what makes the system work.



Previous articleHow Thunder Bay Shops Can Create Short Event-Promotion Videos from a Single Photo